Pipe Coating

Waterproof Paint for Inner Wall of Epoxy Water Tower

Widely used in drinking water tanks, water pipes, water tank, wall painting and sugar water tower water supply equipment, the use of grain cargo. Can also be used as a swimming pool, cooling tower power plant and loaded into fuel oil, gasoline, metal, con
INQUIRY
Description
Product formation
The product is a two-component, high-solids coating of epoxy-based. Divided into primer and topcoat. A component consists of epoxy resin, pigment and additives, additives. Part B is a curing agent formulated in xylene.

Product features:
. Good durability, tough film,
. The film is non-toxic and free of water pollution
. Strong adhesion,
. Good oil resistance, corrosion resistance, abrasion resistance
. Oil resistance, chemical resistance
. Strong water resistance
 
Using
Widely used in drinking water tanks, water pipes, water tank, wall painting and sugar water tower water supply equipment, the use of grain cargo. Can also be used as a swimming pool, cooling tower power plant and loaded into fuel oil, gasoline, metal, concrete wall coating.
 
Packing
Paint: 20kg/bucket  Curing agent: 3kg/bucket
 
Technical Data:
Color and appearance of paint film                 White, smooth paint film
Drying time (25 ), H                          surface dry≤2h, hard dry≤24h, Fully cured 7d
Adhesion (zoned method), class                   ≤1
Impact strength, kg, CM                         50
Flexibility, mm                                 1  
Viscosity (-4 viscometer) seconds               >30
Salt water resistance3%NaCl25℃168 hr   No change in 72h                       
Resistance to 10% acids, alkalis, salts              No change in 72h            
oil resistance                                 No change in 72h
 
Double coating interval time:
Temperature             10℃             25℃             40℃            
Shortest time             14h              10h              8h
Longest time              -                 -                -
 
Surface treatment:
Before coating, the surface dust, oil, oxidation skin and so on should be treated cleanly, reaching SA grade 2.5, so as to ensure the quality of brushing. No water is allowed in construction
 
Construction condition:
The temperature of the base material should be higher than 3 degrees above the dew point. The relative humidity should not be greater than 85%.. The outdoor construction should not be carried out when the temperature is lower than 5 degrees. The construction is strictly prohibited under fog, rain, snow and windy weather
 
Construction method:
Spraying: non air spraying or air spraying. High pressure non gas spraying.
Brush / roll coating: must achieve the specified dry film thickness.
 
+86 13725287956