Waterproof Paint

Cyanide Waterproof and Anticorrosive Paint

. Protect the concrete surface, chemical equipment, pipes, tanks and sluices, dams, ports, mines and other facilities or equipment from anticorrosion
. Work on concrete surface waterproof and moisture proof for construction of facilities, indoor floor, b
INQUIRY
Description
Product formation
Be composed of cyanide, hydroxyl polymer reactant, catalyst and solvent additive, divided into primer and topcoat
 
Product features:
. Waterproof, moisture-proof, leak proof, mildew proof and anti corrosion, constructing in the wet, dry and a variety of surface
. Long service life, weather resistance, anti-aging, non-toxic, tasteless, no pollution
. Safe and simple construction, surface of paint is smooth and wearable
. Concretion body none poison
. Coating acid resistance, alkali resistance, salt and oil and various solvents on the chemical erosion
. Excellent flame resistance and insulation.
 
Using
. Protect the concrete surface, chemical equipment, pipes, tanks and sluices, dams, ports, mines and other facilities or equipment from anticorrosion
. Work on concrete surface waterproof and moisture proof for construction of facilities, indoor floor, basement, water tower, a water tank, a garage, a tunnel, underground buildings, hydraulic build material.
 
Packing
Paint: 20 kg/bucket 
Curing agent: 3 kg/bucket
 
Technical Data:
Color and appearance of paint film                 Film formation
Flashing point,                               29
Solid Content, %                               55-65  
Gloss                                        Gloss 
Dry film thickness, um                          60  
Drying time (25 ), H                         Surface dry 2h, hard dry 24hrs 
Anti permeability, MPa                         0.6
Compressive strength, MPa                      12
Mildew resistant grade                          0
Adhesion (zoned method), class                   1
Flexibility, mm                                2
Impact strength, kg, CM                         50
Wear resistance (Mg, 750g/500r)                  20
Bend test, mm                                 1                  
Viscosity (Stormer viscometer), KU                60
Alkali resistance                               72hrs
Acid resistance                                72hrs
Oil resistance (gasoline, diesel, oil, crude oil)        7days 
 
Double coating interval time:
Temperature               5℃             25℃             40℃            
Shortest time              24h              10h               6h
Longest time                              no limited                            
 
Surface treatment:
All surfaces must be clean, dry and free of contamination. Before painting, should be assessed and treated in accordance with standard of the ISO8504:2000.
 
Construction condition:
Base temperature is not less than 0 , and at least above the air dew point temperature 3 , the relative humidity of 85% (temperature and relative humidity should be measured near the base material), fog, rain, snow, wind and rain is strictly prohibited construction.
 
Construction method:
Spraying: non air spraying or air spraying. High pressure non gas spraying.
Brush / roll coating: must achieve the specified dry film thickness.

 
+86 13725287956